9
5. Installation Step
5.3 Installation of pull bar
1. Open the door to 90°, slide the pull
guide roller into track.
2. Fix the Pull bar plate as shown.
3. Move the plate ensure the wheel at
the middle position of track as shown.
4. Hold the plate position, fix the first
screw near center of the shaft.
5. Close the door, repeat step 3
，
fix
another screw on the other side.
6. Manually move the door to ensure pull
bar work smoothly, adjustment is
required if any resistance is shown
during the operating.
7. Fix the last screw.
Door leaf
Open direction
98mm (3.86in.)
Wall
52mm (2.05in.)
81mm (3.19in.)
37mm (1.46in.)
122mm (4.80in.)
mm (inches)