Fingerprint and Card Reader
User Manual
5
Chapter 2
Installation
2.1
Introduction for DIP Switch
The DIP switch module is shown below. The No. of DIP switch from
left to right is 1 ~ 4, representing the RS-485 address.
Figure 2-1
DIP Switch Module
Table 1-2
Description of DIP Switch
Icon
Description
1
Represent ON in binary mode
0
Represent OFF in binary mode
For example, the binary value of the following status is 1100.
Figure 2-2
DIP Switch Module
Note:
The DIP switch of RS-485 address should reach the access
control devices requirements. For different access control devices,
