BASIC PROGRAMMING
Programming will vary depending on access confirguration. Follow the instructions according to your access
configuration.
General Programming Information
Remote Control
: Please use the Infrared Remote Control to program the Reader. The infrared receiver
head is near LED, so when program the reader, please direct the Remote Control to the LED.
User ID number
:Assign a user ID to the access card in order to track it. The common user ID number can be
any number fom 0~997, the panic user ID is from 998~999. IMPORTANT: User IDs do not have to be
proceeded with any leading zeros. Recording of User ID is crical. Modifications to the user require the User
ID be available.
Proximity Card
: Any 125KHz industry standard 26 bit EM Proximity card.
Enter and Exit Program mode
Set Master Code
Programming Step
Keystroke Combination
1. Enter Program Mode
*
(Master Code) #
2. Update Master Code
0
（
New Master Code
）
#
（
Repeat New Master
Code
）
#
3. Exit Program Mode
*
Add Common Users
Programming Step
Keystroke Combination
1. Enter Program Mode
*
(Master Code) #
Add Card User
2. Add Card: Using Auto ID
(Allows VIS-3009 to assign Card to next
available User ID number)
OR
2. Add Card: Select Specific ID
(Allows manager to define a specific User
ID to associate the card to)
OR
2. Add Card: by Card Number
OR
2. Add Card: Block Learn
1 (Read Card) #
Repeat Step 2 for additional user cards
1 (User ID) # (Read Card) #
The user ID is any number from 0-997.
1 (Input 8/10 digits Card number) #
1 ( User ID number) # (Card quantity)
Programming Step
Keystroke Combination
Enter Program Mode
*
(Master Code) #
Factory default is 123456
Exit Program Mode
*
