Vision Solar Systems - 100 L Gravity Fed Type
Copyright © 2013 - 2016 Enervision. All Rights Reserved.
Issue 2.0 Mar 2013
2
! IMPORTANT NOTICE
Please read this manual immediately on receipt of the equipment, before unpacking and
installation. Failure to comply with these instructions can render warranties null and void.
Care for your equipment and safety
Read these instructions before preparing to install the solar water
heating system. The instructions contain information that will assist
you in your task, provide information about what is contained in the
packaging, and information about the water heater’s performance and
characteristics.
Position the system so that the Tubes are out of reach of children and
children’s play areas. If necessary, a guard can be purchased to protect
the tubes from objects directed at them.
Position the system and any overflow pipes will guide any runoff
water into a safe area. If this is not possible, then a gutter must be
fitted to guide any overflow water into a safe point of discharge
If animals, particularly monkeys are a menace in the area, then
additional protection measures will need to be taken to prevent
damage or malfunction of the system. This protection should prevent
access, but not affect the sun reaching the collector.
Do not touch the inside of the tubes, if they have been subjected to
solar irradiance, the inside can be extremely hot.
.
Do not fill the system with water if the tubes have been subjected to
solar irradiance, the sudden contraction with the cold water will result
in the tubes cracking
The main storage water tank must always be vented to the
atmosphere.
Vent pipes must be open to the atmosphere
Do not fit any pressure controlling devices on the overflow or vent
pipes.
Vent pipes must be open to the atmosphere
Only use elements and thermostats approved by the manufacturer.
