www.visioneng.com/support
Ultra HD digital video inspection system
14
COMPONENTS
Ergo stand / Multi-axis stand
(with base or mounted direct to the work bench)
The S416 adaptor is required to attach the Makrolite 4K camera to the Ergo and the Multi-axis stands.
Note the orientation of the adaptor (figure 17) as this is critical.
Fitting the S416 adaptor
Use the 4 hex screws to attach the dovetail bracket and spacer to the interface plate of the Makrolite 4K using
the screw holes indicated in the image above.
attach the dovetail to the corresponding bracket on the stand. A 2mm hex key is required to tighten the grub
screw on the stand-bracket to ensure the camera is held firmly.
The Ergo stand sub-stage illumination option is not available when used with the Makrolite 4K.
Figure 17: S416 adaptor
Figure 16: Interface plate screw
holes for the S416 adaptor
Figure 14: Ergo stand (EVB010)
Figure 15: Multi-axis stand (EVB021 with EVF111)
