6.7” GEN 2 LED LIGHT CANNON
WARNINGS
As with many other high-tech products, this VISION X LED
requires a bit of attention before you can use it. Please read
the accompanying information carefully first.
1. Don’t stare directly into the light or shine directly into the
eyes of another person as this may cause temporary loss
of vision.
2. Never disassemble the products, as all parts must be
factory serviced to insure proper operation.
3. Don’t interchange the parts inside this light with other
products.
4. The LED light is to be mounted on the vehicle only in a
vertical, bottom mounting, or in a suspended position.
5. After turning on the light, the body might be hot enough
to warrant a burn risk. Be careful when you touch the
body after turning on the light for a long period of time.
6. Use the supplied wire harness for electrical installation.
7.
The LED light must not adversely affect the performance
of low beam, high beam, engine cooling or the driver’s
view.
1
2
3
Qty: 2
Qty: 1
Cannon
Two Light
Harness
Hex Head Bolt
[M10]
LIGHT
WIRING
Qty: 2
PART (B1)
5
Qty: 2
Washer
[M10]
PART (W1)
6
Qty: 2
Nylock Nut
[M10]
PART (N1)
