Page
8
/
16
■ VC58SM3Ti
Power Connector:
Only use the supplied AC adapter to avoid any possible damage from electric shock.
Network Connector:
Connect 10Base-T Ethernet or 100Base-TX Fast Ethernet cable. When use PoE, connect
Ethernet cable coming from PoE injector or switch.
Sensor/Alarm Connector:
To connect external devices such as infrared sensors, alarms or motion detectors.
Audio-out:
Use to connect to an external speaker for audio communication. The audio sent over the network
from a connected client computer can be delivered through this externally connected speaker.
Audio-in:
The external microphone for audio input. The live audio can be captured and transmitted to the
connected camera client via the use of this MIC.
RESET:
Restore the factory default settings.
Power LED (Green):
Once power is supplied to the camera, the green LED will light.
Operating Status LED/Network Activity LED (Yellow):
This LED indicates the camera’s operating status. Once
power is supplied and the camera is connected to network, the LED lights and then blinks very fast as long as
the video is transmitted on the network during normal operation. When there is no video transmission, the
LED stops blinking.
SD Card Insert Hole :
Insert SD Card for local storage
Analog Video Out :
Utilizes analog video by connecting to DVR or monitor, or can be connected to video tester
when installing camera.
SD Card Insert Hole
Status LED (Yellow)
Power LED (Green)
Network Connector
Analog Video Out
Power Connector
Microphone-in(Audio-in)
Speaker-out (Audio-out)
Reset button
Sensor/Alarm Connector
RS485 Connector
Содержание VC58EHi
Страница 16: ...Page 16 16 ...
