Page
10
/
16
●
Take off the Protection cover.
●
Assemble the CS-MOUNT lens by turning it clockwise.
- When used with an Auto Iris lens, please insert
the iris jack into the Iris socket which is located
on the right side of the camera.
- Please set the lens selection to DC on the OSD setting.
Caution
-
Use the lens as shown in the picture here.
-
When the lens is out of the spec, it could damage the camera inside or
may not be correctly fitted with the camera.
-
Use the lens less than 450g. Heavier lens can damage the camera.
6-5. Video Monitor
Connect Video cable with BNC-male connector to the monitor
6-6. 12V DC Power
This IP camera uses 12VDC or IEEE802.3af PoE for power source. Please make sure to use a UL/CE approved
and 12VDC/500mA regulated power supply or standard PoE injector, mid- or end-span for input power.
PoE (Power over Ethernet) Support
Power over Ethernet, or PoE, technology describes a system to transmit electrical power, along with data, to
remote devices over standard twisted-pair cable in an Ethernet network. This technology is useful for
powering IP telephones, wireless LAN access points, network cameras, remote network switches, embedded
computers, and other appliances where it would be inconvenient and expensive. (Main wiring must be done
by qualified and/or licensed person.)
Содержание VC58EHi
Страница 16: ...Page 16 16 ...
