Step 6: Lava Stone & Bracket Assembly
• Open grill and take off grill grates to expose fire bowl.
• Spread bracket so it makes an “X” shape and lower into fire bowl,
allowing the bracket to rest on edge of fire bowl.
• Lower Lava Stone onto the bracket.
STEP 6
Step 3: Handle and Side Shelf Mounting
• To assemble handle, remove nuts and washers from bolts welded on the top
banding opposite the hinge.
• Remove paper washers and attach handle bracket over studs. On each stud
place a flat washer and an acorn nut, then tighten (Step 3).
• Mount side shelves by inserting the shelf rod into the shelf bracket. Tilting the shelf
up slightly and sliding in or out allows you to deploy the shelves.
STEP 3
Step 4: Grill Assembly
• Take all parts out of grill before lifting. The grill is heavy and will require two people
to lift and guide the Kamado into cart.
• Be sure the ProZone
TM
is centered between the two front legs and the grill is resting
against the two back legs.
• Lower fire bowl into grill with the ash drawer opening lined up with the opening in the
main ceramic body. Place cast iron charcoal grate with attached starter pocket into
fire bowl (Step 4). Align tabs of starter pocket with electric starter port in fire bowl.
Step 2: Shelf Brackets
• Remove nuts and washers from bolts welded on the bottom banding
and remove paper washers.
• Mount shelf brackets over studs with bracket slots facing up. Brackets
are stamped on the back with letters indicating their position (e.g.,
LF=Left Front and RB=Right Back).
• Mount flat washer then acorn nut on each stud and tighten with wrench
provided.
STEP 2
STEP 4
Step 5: Install Grill Light
• Remove nut and washer from the first bolt
on right side of bottom banding.
• Slide flexible light bracket over bolt, then
replace washer and bolt and tighten (Step
5a) and insert flexible light into bracket
and tighten knob (Step 5b).
STEP 5a
STEP 5b
