5
1
STEP
2
STEP
1
STEP
• Install the left and right
stabilizers with the four arc-shaped
washers (M8) and four bolts (M8 x
20), using the Blue 5
MM
Allen wrench.
• Cover both stabilizers with the
included rubber boots.
ORANGE BAG
2
STEP
• Slide the console mast cover onto
the console mast.
• Unfold the console cable and
attach it to the string located inside the
console mast. Guide the wire up
through the mast while simultaneously
sliding the console mast onto the
frame bracket.
• Attach the console mast cover to the
frame using four screws (M4 x 12).
• Bolt the mast to the frame with the
two bolts (M8 x 75), using the
5
MM
Blue-handled Allen wrench. Make
sure these are tight!
• Attach the console mast cover plate
with the V-head screw (M3 x 10).
BLUE BAG
