41
CHAPTER 5: PART REPLACEMENT GUIDE
5.18 Drive Axle Set Replacement – Continued
7) Use a mallet with a punch to hit the remained bearing until it is removed from frame (Figure I & J).
FIGURE I FIGURE J
8) Reverse Steps 1-7 to install a new drive axle set.
NOTE:
The bearings on the drive axle cannot be re-used after removal of the drive axle assembly.
NOTE:
Clean the bearing frame housing and daub a fixative (Red Loctite 603 is recommended) on the inside of housing in the frame prior to installation
of a new drive axle set (Figures K & L).
NOTE:
Torque the screw removed in Step 5 to 20 N-m.
FIGURE K FIGURE L
9) Test the bike for function as outlined in Section 5.20.
Please daub with
fixative (LT-603) on the
inside of housing.
