background image

Copyright

Copyright © 2015 Vision Engineering Ltd., Send Road, 
Send, Woking, Surrey GU23 7ER, UK All Rights Reserved.

Mantis® (1532468), Lynx® (3672061) and Dynascope® 
(915579) are registered trademarks of Vision Engineering 
Ltd. The use of our trademarks is strictly controlled and 
monitored and any unauthorised use is forbidden.

Copyright in this document is owned by Vision 
Engineering Ltd. Any person is hereby authorised to 
view, copy, print and distribute this document subject to 
the following conditions:

 

§

The document may be used for informational purposes 
only

 

§

The document may be used for non-commercial 
purposes only

 

§

Any copy of this document or portion thereof must 
include this copyright notice

Revision 1.0, published July 2015 by:

Vision Engineering Ltd. 
Send Road, Send 
Woking, Surrey, GU23 7ER, UK 
www.visioneng.com

Disclaimer

This document is provided “as is” without any warranty 
of any kind, either express or implied, statutory or 
otherwise; without limiting the foregoing, the warranties 

of satisfactory quality, fitness for a particular purpose or 

non-infringement are expressly excluded and under no 
circumstances will Vision Engineering Ltd. be liable for 
direct or indirect loss or damage of any kind, including 

loss of profit, revenue, goodwill or anticipated savings. 

All such warranties are hereby excluded to the fullest 
extent permitted by law.

We have compiled the texts and illustrations as accurately 
as possible. However, Vision Engineering Ltd. will not be 
responsible for the accuracy of the information contained 
in this document, which is used at your own risk and 
should not be relied upon. The information included in 
this manual may be changed without prior notice.

Содержание EVO Cam

























Отзывы: