![Vision Aqua Verdanium Home Скачать руководство пользователя страница 24](http://html1.mh-extra.com/html/vision-aqua/verdanium-home/verdanium-home_instructions-manual_1031714024.webp)
Instruction Manual – Verdanium Home
– Ver. 2.2.1 – 04.2021
Instruction Manual – Verdanium Home
– Ver. 2.2.1 – 04.2021
46
47
Connection of storage tank for dishwasher and/or washing machine (optional)
Connecting a washing machine or a dishwasher to the ultra-pure water requires a separately available
connection adapter.
Connecting multiple water-consuming devices requires additional adapters as well
as either multiple storage tanks or a larger tank.
Determine the location of the storage tank before you start to install it. The storage tank should be in a
suitable location with sufficient space.
Proper functioning of the storage tank is only guaranteed if the tank is installed upright (under the sink).
The stopcock of the tank should be clearly visible, accesible and easy to operate.
The water inlet of the storage tank is open when the stopcock lever is pointing parallel to the plastic tube.
Please follow these steps to install the storage tank:
•
Wrap a few layers of Teflon tape around the thread on the reservoir (if not present).
•
Attach the stopcock to the storage tank.
•
Insert the plastic tube into the stopcock as far as it will go (approx. 1.7 cm).
•
Use the connection adapter to connect a washing machine or dishwasher.
You can easily connect the drain tube of the Verdanium Home to all 40 mm thick plastic drainage pipes. Be-
fore you start with the installation, determine the positioning of the drain clamp.
When installed, the water drain should be visible. Please check that the connections to the Verdanium Home
and the drain clamp are leak-proof, with the withdrawal tap open.
Please use the illustration below as a reference for the installation of the drain clamp:
•
Drill a hole (above the odour trap) with a 7 mm drill bit.
•
Stick the foam rubber seal into the drain clamp.
•
Attach the clamp and tighten both screws evenly hand tight.
•
Push the plastic tube 30 mm into the drain clamp connector.
Do not use force when tightening the clamp screws. Install the plastic tube to the Verdanium
Home
without any kinks. Do not install any additional fittings such as pressure reducers or
check valves etc. on the tube to the drain clamp
Install the drain clamp above the odour trap of the siphon.
Drainage
Drain clamp top view
Drain clamp installed
Foam rubber seal
Hole Ø 7 mm
Drain clamp 1/4“ tube AD
Item No.: 1000034
Plastic tube 1/4“
Item No.: PE-08-BI-0500F-R
Drain Verdanium Home
wastewater
Verdanium Home output
Ultra-pure water
Drain clamp
Storage tank
Withdrawal tap
Plastic tube 1/4“
Item No.: PE-08-BI-0500F-R
Plastic tube 1/4“
Item No.: PE-08-BI-0500F-N
Y-connector - 3 x 1/4“ tube
AD two-way Divider
Item No.: PI2308S
Y-connector - 3 x 1/4“ tube
AD two-way Divider
Item No.: PI2308S
Check valve -
1/4“ tube AD
Item No.: 14SCV
Plug-in angle connector -
Stem Elbow - 1/4“ connector
to 1/4“ tube AD
Item No.: CI220808W
T-connector 2 x 1/4“ tube
AD to 1/4“ connector -
Stem Tee
Item No.: CI530808W
Stop cock, stop valve 1/4“
tube AD
Item No.: PPSV040808W