background image

SLB-500-W5K7-P-24V

Maintenance and Service

8 MAINTENANCE AND SERVICE

8.1 Maintenance

The device is maintenance-free. Depending on the operating environment, it

may have to be cleaned.
The housing can be cleaned according to the conditions applicable to the given

protection class.

Cleaning the outside

Clean the outside with a damp cloth.

Remove excessive dirt with an approved anodised aluminium cleaner. Refer

to the instructions of the cleaner.

The connectors must be clean and dry before the device is connected and

put into operation.

Cleaning the optical surfaces

NOTICE

Follow the specified cleaning sequence. Never use dry cloths for cleaning.

This allows dust and other contaminants to be rubbed into the lens surface,

thereby damaging it.

1. Remove non-adherent dusts with a blower brush or cleaned compressed

air.

2. Remove lager non-adherent contaminants such as chips or granules by

dabbing with a cloth. Never rub under any circumstances.

3. When all non-adherent particles have been removed, use an untreated lens

cleaning paper for lenses or an optical cleaning cloth that was soaked in

an especially for optics suitable detergent. Observe the instructions of the

manufacturer.

Cleaning by the manufacturer

The device can be sent to the manufacturer for cleaning (for a fee). Please

contact our technical support.

24

999.995.394.10-en-1.2

© Vision & Control GmbH 2021

Содержание SLB-500-W5K7-P-24V





























Отзывы: