TO30/9.1-85-F10-B-RF
Maintenance and Service
8 MAINTENANCE AND SERVICE
8.1 Maintenance
The device is maintenance-free. Depending on the operating environment, it
may have to be cleaned.
Perform cleaning only if the imaging characteristics are noticeably disrupted.
Only clean surfaces accessible from the outside. Do not open the lens.
If there is dirt inside the lens, contact the support.
When cleaning the outside, cover the lenses with the caps (scope of delivery).
Perform cleaning operations on optics in bright, dust-free, dry, wind and
weather-proof workplaces.
When cleaning the lenses wear clean, dust-, lint- and grease-free gloves.
Do not apply cleansers directly to the housing or the lens. Do not bathe the
device.
Cleaning the outside (non-optical surfaces)
•
Clean the outside with a damp cloth.
•
Remove excessive dirt with an approved anodised aluminium cleaner. Refer
to the instructions of the cleaner.
30
999.995.930.10-en-2.2
© Vision & Control GmbH 2019
