VisioBraille Visio 500, Руководство пользователя

Страница: 41 / 52

Service box 41
To put the camera back in
transport position, slightly lift the
camera and press the transport
lock button on the center back of
the device. Now you can move
the camera arm down. The
camera angle can be adjusted
manually so it sits flat on the
table. Do not forget to put the soft
pad between camera and table.
Now we move the monitor arms
back in and move them slightly
down below horizontal position.
Please press the buttons on the
back of the monitor to release the
monitor arm locks.
Now you should be able to push
the transport lock for the arms into
the right lock position. It is on the
left side on the back of the Visio
500.
The process was successful when
the monitor arms cannot be lifted
beyond the horizontal position.
Now Visio 500 can be lifted at the
arms.
Finally, switch off device and unplug the power adaptor. Now you can put
Visio 500 into the service box. Do not forget to add the power supply.
The brake lever at the front of the reading table is in the rightmost
position which fixes both movements in x- and y-direction.
The reading table mode switch at the rear left is in upright position which
does not lock the y- direction.