VisioBraille Visio 500, Руководство пользователя

Страница: 11 / 52

First Steps 11
Next lift up the camera arm. The
camera should lie flat on the reading
table when Visio 500 is delivered. If
you lift it, there is a point at which it
will lock in and cannot be pushed
below this point. Then tilt the camera
until it is facing straight down without
applying much force.
Now adjust screen in the right reading position. To do so, release the
monitor arm breaks by pressing the bigger button on the back of the
screen. Push the screen back and slightly tilt it until you can look at it
comfortably. Position the camera in reading position.
Lastly the camera must be moved in the
right position. To move the camera
automatically, press the smaller buttons
on the back of the screen. They are
located just above the buttons to control
the monitor arm brakes. The upper one
of the two small buttons moves the
camera away from you. The lower one
towards you. Use one of the two buttons
to move the camera in reading position
which means it should face towards the
front of the reading table.