VisioBraille Vario 340, Руководство пользователя

Страница: 10 / 28

First steps 10
5
First steps
Make sure that the power switch on the left side of the device is switched
to the back, which means towards the USB port. In that position the
Vario 340 is switched on. As soon as Vario 340 gets power via USB
connection the device name and version number is shown on the braille
cells. This message will disappear automatically after short time or when
the screen reader sents his data.
If you want to power off the Vario 340 slide the power switch towards
you, which means away from the USB Port.
Updates for Vario 340
From time to time, new Vario 340 firmware updates will become
available for download on our websi
te. Please visit “Support” at
http://www.visiobraille.de
5.1.1 Performing firmware updates
A small PC tool must be executed to install a new firmware version on
Vario 340. Therefore Vario 340 must be switched on and connected to
the computer. During the installation the braille display shows a progress
bar. After the process is finished, Vario 340 will restart automatically and
shows the new version number. The update process will take a few
minutes to be completed.