VISIO VG-4-3TC-P, Руководство пользователя

Страница: 4 / 10

3-
y
The housing, the lenses, or the ultraviolet filter must be replaced if they are visibly damaged.
y
Do not open the unit as there are no user serviceable parts inside. Never try to repair the unit by
yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact
the nearest authorized technical assistance center.
y
Disconnect the mains power if the fixture is not used for a long time.
y
Do use original packing materials once transport it again.
y
To prevent or reduce the risk of electrical shock or fire, do not expose the unit to rain or moisture.
y
Do not look directly at the LED light beam while the fixture is on.
Installation
The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is firmly
fixed to avoid vibration and slipping while operating. Always ensure that the structure to which you are
attaching the unit is secure and is able to support a weight of 10 times of the unit’s weight. Also always
use a safety cable that can hold 12 times of the weight of the unit when installing the fixture.
The equipment must be fixed by professionals. And it must be fixed at a place where is out of the touch
of people and has no one pass by or under it.
2.
Techical Specfications
y
Light source
:
4X3W Tri-color LED
y
Voltage
：
AC 110-220V/50HZ
y
Power consumption
：
20.2W
y
Dimension
：
171 x 133 x 237 mm
y
Weight
：
3.2kg
3. How TO Control The Unit
You can operate the unit in two ways
：
1.
By DMX controller
2.
By VD-T
VD-T is a specially designed handy setup tool for all Visio integral fixtures and Controllers. By
connecting VD-T to any fixture via XLR, you can easily setup DMX Address, Channel Modes, White
Balance, Manual Colors, and Fade Speed functions.