WiFi Microscope User Manual
Page 7 of 31
User guide: Working at WiFi Mode
1.
Install WiFi Micro:
For
iPad
and
iPhone:
S
earch
“
Visio-tec
”
in
App Store
to download and install it.
For
Android
’
s Smart-Phone
and
Tablet:
Search “Visio-tec” in Google play Store to download and install it.
For
Windows
and
Mac PC:
Install the app
“
Mac (Windows (WiFi software)\Win (WiFi software).exe
”
(for windows OS) or
“
Mac (WiFi software)\
Mac (WiFi software).dmg) from the www.visio-tec.net.
2.
Slide the Power switch to the
“
WiFi
”
, and the power LED
indicator will light, wait for ~20 seconds until the WiFi
indicator
and the illumination LEDs light, then the WiFi signal will be transmitting correctly.
3.
Check the wireless connection on your Phone/Tablet or PC and a list of available networks will appear. Select the SSID
“
WiFi2SCOPE_xxxxxx
”
network from the list to connect; the network
“
WiFi2SCOPE_xxxxxx
”
requires a password: enter
the password
“
12345678
”
and click Ok.
4.
Once connected, please wait for about 5 seconds to open the
“
WiFi Micro
”
application to see your images. If there is no
video display, please close and restart WiFi Micro app again. The WiFi indicator LED
flashes and video stream signal
should be displayed in the app. Video streaming can be broadcasted to many devices, but the frame rate of live video will
decrease as the number of receiving devices increase.
Setting for Internet and Microscope
’
s WiFi Connection at the same time
To access the internet by WiFi connection at the same time the WiFi microscope is working, open an internet browser, input
http://10.10.1.1
, and click
“
enter
”
. A pop-up window will require you to enter a username and password, please enter: admin
and admin, and then this window should appear: