WiFi Microscope User Manual
Page 6 of 31
How to Use
Part Description
.
The Power
“
OFF/USB
—
WiFi
”
Switch
WiFi
: WiFi Microscope works in WiFi mode when Power Switch is moved to
“
WiFi
”
side.
OFF/USB
: Power-off WiFi Microscope when Power Switch is moved to
“
OFF/USB
”
side; also, USB microscope works if
connected to PC
’
s USB port via MiniUSB cable.
WiFi Indicator
(
Blue LED
): Flashing light indicates data transmission; Constant light indicates no data transmission.
Power Indicator
(
Blue LED
): Lights when power on WiFi or connected to PC via MiniUSB cable.
Battery Indicator
(
Blue LED
or
Red LED
):
Red LED
lights when battery level low;
Blue LED
lights when battery charging full.
Charge Indicator
(
Red LED
): Lights when the battery is being charged; turn off when the battery is fully charged.
Charging Instructions:
1.
Connect the PC
’
s USB cable, it charges whether the power switch is on WiFi or OFF/USB. (We DO NOT recommend
charging WiFi Microscope while using)
( 2.
The Charge LED is on when the device is charging. When the battery is at full charge, the battery LED comes ON.
Snapshot Button:
Every time after the success connection of the WiFi microscope, you MUST enable the Snapshot feature on
App (The LED illumination will be off and then lights up again). The Snapshot only works with the receiver device which the
snapshot feature of its app is enabled in the last.