9
Quick Guide - Viscount
Prestige 40
amplified speakers, remote amplification systems or recording systems. For monophonic signals
connect to the [L(MONO)] socket only.
2.6 CONNECTIONS ON THE REAR PANEL
-
+
EXT.
+12V DC
300 mA
1
2
3
4
L (+R)
R
MIC
GAIN
OUTPUT
INPUT
1
2
3
Internal connections by qualified service person only.
1. [EXT. +12V DC] connectors:
these sockets can be used to obtain the +12V DC voltage needed
to supply the VISCOUNT speakers connected to the [OUTPUT]. In the Prestige 40 the external
boxes can be switched on and off by using the [EXT.SPK.] switch located on the left side panel.
2. [OUTPUT] Section:
this section contains four line outputs for the external organ amplification.
By means of the internal set up functions, which can be called up using the central control unit,
it will also be possible to edit various parameters for these audio outputs (individual volumes,
delays and equalisations) and to set these outputs in such a way as to simulate the wind chests
of the original church organs. These functions called EXTERNAL OUTPUTS CONTROL and
EXTERNAL VOICES ROUTER are described in the “Advanced Manual”.
WARNING!
-
In order to reach a proper pipes simulation, you have to locate the speakers boxes according
to the output numbers. The speaker box connected to output [1] has to be located on the
extreme left followed by all other speakers connected to outputs [2], [3] and [4] will be
located to the extreme right.
-
The volume controls for the manuals, the pedal board and the Orchestra voices are in the
drawer under the keyshelf (see also par. 3), as well as the expression pedals also affect the
levels of the audio output signals [OUTPUT] found on the back panel and in the drawer
under the manuals. The only control that does not affect these outputs is the [GENERAL]
trimmer.
