8
Viscount - Quick Guide
Prestige 40
1
2
3
4
1. [HEADPHONES] socket:
Jack socket to which a headphone set can be connected.
With headphones connected, the organ’s internal amplification is cut off.
NOTE
For optimum performance from the [HEADPHONES] output it is recommended that
headphones with a minimum impedance of 16
Ω
be used.
2. [MIDI] sockets:
five-pin DIN plugs for connecting instruments with MIDI interface.
The [IN] connector allows receipt of MIDI messages generated by remote MIDI sources, the
[OUT] connector sends the MIDI messages generated by the Prestige, and the [THRU]
connection sends exactly the same data received at the [IN] connector.
on the centre panel (see also point 5 of par. 2.1).
Each Crescendo step is programmable. To do this, use the [CRESCENDO] pedal to select the
step required, switch on the voices and couplers needed, press button [S] and, keeping it pressed
down, then press the general memories [HR] button.
4. [MIDI SUSTAIN] piston:
Sustain piston of the
Orchestra voices
and by which CC64 is sent
to the [MIDI OUT].
5. Coupler pistons:
these pistons activate the organ couplings described in par. 2.1.
6. [TUTTI] piston:
the piston used to activate the Tutti. For a more detailed description, refer to
point 5 of par. 2.3.
2.5 CONNECTIONS UNDERNEATH THE MANUALS
3. [INPUT] sockets:
RCA input sockets which allow other instruments to be played using the
organ’s internal amplification. If the source is monophonic use the [L(MONO)] connector only.
4. [OUTPUT] sockets:
RCA sockets to output the non-amplified signal, for connecting optional
