background image

Owner's Manual – Viscount 

Cadet 21

To modify the volume, press 

[TRANSPOSER]

 button, moving between the seven levels. It's also 

possible to hear the voice playing on the keyboard (turn On Split if you want to hear Manual I 
voices). Turn on more than one voice to hear the global effect. 

To 

REGULATE TREMOLO SPEED AND DEPTH

, follow the procedure indicated in previous 

paragraph for the regulation of voices volume, but instead of pressing a voice stop, press the 
Tremolo stop. Then pressing repeatedly the 

[TEMPERAMENT]

 button it's possible to choose 

between seven possible speed levels (indicated by Temperament LEDs) and pressing repeatedly 

[TRANSPOSER]

 between seven possible modulation depths (indicated by Transposer LEDs).

It's possible to evaluate the tremolo intensity by turning on a voice on Manual II and then by 
pressing the Tremolo stop again. The keyboard will play the voice with the Tremolo effect.

Note: Tremolo modulates only Manual II voices.

4.3 MEMORIES

The 

Cadet 21

 has 12 adjustable General (i.e. They memorize the state of the entire voice set of the 

instrument) combinations, to save your register configurations, divided into two banks (Bank A and 
Bank B) of 6 memory each.

To

 SAVE A MEMORY

 push 

[SET]

 together with a memory button (buttons 

[1]

 to 

[6]

). If necessary, 

first push the 

[BANK]

 button to switch between Bank A and Bank B.

To 

RECALL A MEMORY

 push the relative button (buttons 

[1]

 to 

[6]

). Push the 

[BANK]

 button to 

switch between memories 1-6 of Bank A and 1-6 of Bank B and viceversa.
To recall a memory placed in the other bank always remember to press 

[BANK]

 and then the 

desired memory button.

When a memory is active it is possible to turn off all the registers at the same time (this function is 
normally called Cancel), by pressing the active memory button for a few seconds. In this state the 
organ will still send MIDI messages, allowing the use of the 

Cadet 21

 as a “mute keyboard” (or 

Master Keyboard), that is capable of driving another keyboard, organ, sequencer, without 
generating sounds. For example it can be useful to connect it to another Viscount organ or expander 
(as CM100) to let its voices sound.
To let the 

Cadet 21

 sound again just activate registers or memories.

10

Содержание Cadet 21























Отзывы: