Viscount Allegro, Руководство по эксплуатации

Страница: 22 / 30

Viscount Allegro
44
C 1
A 1
0 2 4 5 7 9
- [EL.PIANO] key: association of the MIDI
channel to the BASS section;
- [HARPSI] key: status of the Program
Change MIDI filter;
- [NY.GUITAR] key: status of the Control
Change MIDI filter;
- [STRINGS] key: transmission of a Program
Change on the MIDI 1st VOICE channel.
3. Assign a MIDI channel to the 1st VOICE,
2nd VOICE and BASS sections.
Once the LED of the [CHOIR-MIDI] key
has started to flash, press the relative key to
assign the MIDI channel to the section of
your choice.
Using the keyboard keys from C1 to A1,
which in this case are equivalent to numbers
0 to 9 (as shown in the diagram), type the
number of the MIDI channel, always using
two figures. For example, to indicate MIDI
channel 7, press keys C1 and G1, i.e. 0 and
7. After the second number has been
entered, the LED of the selected section will
remain on for two seconds, after which it will
go out and only the LED of the [FUNCTION]
key will flash. Press this key to exit from the
function, or pass the relative key to move to
another MIDI function.
4. Select the status of the Control Change
(pedal pressure) or Program Change
filters.
To select the filter status, press the key
corresponding to the filter to be enabled or
disabled. The current status will be shown by
the corresponding LED for about two
seconds, after which all the LEDs will go out,
leaving the FUNCTION key LED flashing.
5. Transmit a Program Change on the
basic channel.
To send a Program Change on the basic
channel associated to the 1st VOICE, press
the corresponding key, and once its LED
starts to flash, digit the number of the
Program Change you wish to transmit in the
section of the keyboard between keys C1
and A1.