www.viscoo.eu
•
JP/LK (Lock Control Jumper):
To select the lock type: see section 4
•
Doorstation Code DIP:
Total 4 door stations can be supported, see section 5
•
RS485:
Used to update the program for door station
•
MIC
: Adjust the volume of Microphone
•
SPK
: Adjust the volume of Speaker
•
Main Connect Port:
To connect the bus line and the electronic locks.
•
BUS:
Connect to the bus line, no polarity.
•
PL:
External lock power input, connect to the power positive (power +).
•
S1+, S2+:
Lock power(+) output, to connect 2 locks.
•
S-:
Lock power(-) output, connect to the power(-) input of locks(only when using the
camera to power the locks, if using the external power supply for the locks, the S-
will not be connected).
IT-OUT250 Mounting
3. Door Station Mounting
www.viscoo.eu
• You can activate the electric door strike by pressing the request to exit button con-
nected to the unit. Pressing request to exit button 1 releases relay 1, and pressing
request to exit button 2 releases relay 2.(The unlock function will work when the
request to exit button is pushed, even while the proximity access is forbidden.
1. If show the authorized user card,the buzzer will sound of beep+,and the
LED indicator will light up.
2. If show the unauthorized user card, the buzzer will sound of beep, beep,
beep.
8. Precaustions
• Please clean the unit with soft cotton cloth, don't use the organic impregnant or
chemical clean agent. If necessary, please use a little pure water or dilute soap
water to clean the dust.
• The unit is weather resistant. However do not spray high pressure water on ac-
cess control keypad directly. Excessive moisture may cause problems with the
unit.
• You must use the right adaptor which is supplied by the manufacture or approved
by the manufacture..
• Pay attention to the high voltage inside the products, please refer service only to
a trained and qualified professional.
9. Specifications
•Power Supply: DC 24V (supplied by PS4-24V or PS5-24V);
•Power Consumption: Standby 60mA; Working status 200mA;
•Camera: Pinhole Sharp Color CCD; 420 TV Lines;
•Lock Power supply: 12Vdc, 300mA (Internal Power);
•Number of relay circuits: 2
•Mounting: surface mounting(IT-OUT250) Flush mounting (IT-OUT250-F)
•Working temperature: -10ºC ~ +45ºC
•Wiring: 2 wires, non-polarity
•Dimension: 176(H)×90(W)×28(D)mm(DT596/ID)
220(H)×119(W)×52(D)mm(DT596F/ID)
