2 0 –
V I S A M T O U C H P A N E L V T P - B C 7 0 / 1 0 0
HB_VTPBC_70_100v1.0e_FINA
L.doc
4.10 VTP Tool
4.10.1 General
With the „VTP Tool“ a tool is provided that can adjust a series of system-settings
on your VTP.
In the following chapter the possibilities of these programs are described.
beschrieben.
Always save your settings by saving the „Registry“ as described in the
section „Save Changes to settings permanently”!
To open the program double-click the symbol „My Device“ on the desktop of the
VTP. In the now open window double-click on the symbol “HardDisk”. In the next
view the program “VTP Tool” can be found and opened by double-clicking. After
starting the program the following surface appears:
Figure 16 VTP Tool Start Picture
In the top area of the program window five tabs are lined up, which contain the
different setting options.
By clicking the corresponding tab the view changes accordingly.
As in the figure 15 depicted the other tabs cannot be completely displayed. But
the tabs can be moved by clicking the small arrows in the top right.
Requirements for the functionality of the VBASE-runtime environment:
The following settings should not be changed at all. They are part requirements
for the VBASE-project transmission from and to the VBASE-runtime environment
(VOK).
Firstly, the FTP-Server must be activated that a VBASE-project (files) from the
VBASE-Editor can be transmitted to the VTP or vice versa. On the other hand the
Telnet-Server must be activated. This is necessary so that the VBASE runtime
environment can be stopped by the VBASE-Editor for example before
transmitting a VBASE project and subsequently be restarted.
At the delivery of the VTP the FTP-Server and the Telnet-Server are both
activated with all options. The FTP-Server has also a default directory specified.
This is the directory which is accessed by default when connecting via a FTP-
Connection (even anonymous, if this option is checked). This directory must
