1 8 –
V I S A M T O U C H P A N E L V T P - B C 7 0 / 1 0 0
HB_VTPBC_70_100v1.0e_FINA
L.doc
4.7
Connect network share
A VTP can be connected to a PC-system respectively a server in a network to
directly transmit data to these (e.g. Journaling).
To connect the VTP with a shared drive or directory on a tot he network
connected system, proceed as follows:
Select in the Start-Menu >> „Programs“ >> „cmd“.
Figure 14 Prompt
Enter here the following commands:
"
net use share-name \\servername\share /user:<user>
/password:<password>
"
„share-name“ – represents individual used name for the share.
„\\servername\share“ – describes the share on a distant device.
„<user>“ – represents the name of the user, who has the authorization to use
the share.
„<password>“ – Represents the password which is used for the user that has
the authorization to use the share.
After the successful input the share can be found "My Device" >> "Network" >>
"share-name".
Save your settings by saving the „Registry“ as described in the
section „Save Changes to settings permanently”!
