Operation Manual:
1. ID code and LED colour corresponding relationship:
0: Red
1: Green
2: Blue
3: Yellow
4: Cyan
5: Purple
2. Press ID CODE SELECTOR button one time to indicate current ID code. Then press
this button again to set your preferable ID code, the ID code value will add 1 each
time by press
3. Working condition:
LED constant lit up: no DMX or wireless signal
Red LED flash: transmitting
Green LED flash: receiving
4. RF frequency----------------2. 403-2. 48G, toal 126 channels, searching automatically
5. ID Code --------------
“0.5” groups ID Code, press ID code selector button for setting, it
only can work under same ID code of transmitter and receiver
Establishing Communication
1. Power on DMX512 wireless received board and transmitted board
2. Press ID CODE SELECTOR button to set same ID value of transmitted board and
received board, please use different ID value if you need to use more than 1 group
wireless net at same time in same place
3. The red LED will flash when transmission is operating to identify an open frequency,
receiver will then change when frequency section has been communicated. Green
LED will flash until receiver has connected to the same ID value, LED will flash faster
once DMX data has been identified and received.
4. Communication will be established