MINI-BEAMWASH
Page 7
PAN INVERSE
To select
Pan
, Press the ENTER button to show the PAN INVERSE on the display. Use the DOWN/UP button to
select the
Yes
(PAN inversion) or
No
(normal) mode. Once the mode has been selected, press the ENTER button
to setup, to go back to the functions without any changes press the MENU button again. Hold and press the MENU
button for one second or wait for one minute to exit the menu mode.
TILT INVERSE
To select
Til
, Press the ENTER button to show the TIL INVERSE on the display. Use the DOWN/UP button to select
the
Yes
(tilt inversion) or
No
(normal) mode. Once the mode has been selected, press the ENTER button to setup,
to go back to the functions without any changes press the MENU button again. Hold and press the MENU button
for one second or wait for one minute to exit the menu mode.
AUTO TEST
To select
Test
, press the ENTER button to show the TEST on the display and the unit will run a self
‐
test. To go
back to the functions without any changes press the MENU button again. Hold and press the MENU button for one
second or wait for one minute to exit the menu mode.
FIXTURE HOURS
To select
Fhrs
, press the ENTER button to show the FIXTURE HOURS on the display and the display will show
the number of working hours of the unit. To go back to the functions without any changes press the MENU button
again.
Hold and press the MENU button for one second or wait for one minute to exit the menu mode.
SOFTWARE VERSION
To select
Ver,
press the ENTER button to show the SOFTWARE VERSION on the display and the display will show
the version of software of the unit. To go back to the functions without any changes press the MENU button again.
Hold and press the MENU button for one second or wait for one minute to exit the menu mode.
RESET
To select
rSet
, press the ENTER button to show the RESET on the display. Press the ENTER button and all
channels of the unit will return to their standard position.