manualshive.com logo in svg

ViSAGE VIS122, Инструкция по эксплуатации, Страница: 11 / 11

Поделиться
Скачать
ViSAGE VIS122 Скачать руководство пользователя страница 11

                                                                                         MINI-BEAMWASH  

Page 11 

 

There must not be any deformations on the housing, glass pane, fixations and installation spots.  

The  electric  power  supply  cables  must  not  show  any  damage,  material  fatigue  or  sediments.  Further  instructions 

depending on the installation spot and usage have to be adhered to by a skilled installer and any safety problems 

have to be removed.  

We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use alcohol or solvents.  

CAUTION

: Disconnect from mains before starting maintenance operation!  

  

Cleaning and Using Frequency of Product  

Please make sure that the light is 

power off before dismantling or maintaining, it’s very important to keep the light 

clean. Frequent cleaning will ensure maximum brightness output, but also prolong the life time. It’s suggested to use 

the  high  quality,  professional  glass  detergent  and  soft 

cloth  to  clean  the  light.  It’s  not  allowed  to  use  alcohol  or 

chemical solvent. The inner part of the light should be cleaned by vacuum cleaner at least once a year.  

When the light doesn’t work, please check if the fuse is burnt out or not. If it is, the same fuse should be replaced, 

find out the faulty and restart the light. But please note the repair must be handled by professional.  

  

TECHNICAL SPECIFICATIONS  

Channels: ..........................................................................................  15/21 DMX Channels 

Control mode: .................................................. Sound activated, Auto, Master / Slave, DMX 

Wash face LED power: ............................................... 4 x 10W RGBW LEDs (4 in 1 ) LEDs  

Wash angle: ..................................................................................................................... 25°  

Beam face LED power: .......................................... 12W RGBW LEDs (4 in 1 ) CREE LEDs  

Beam angle: ...................................................................................................................... 3° 

Working environment: ........................................................................ indoor, 20°C 

– 40°C 

Voltage:  ..................................................................................................  AC  100-240V 

±10%  Frequency:  ..................................................................................................  50-60Hz 

Power: .......................................................................................................................... 70W 

Dimensions: ............................................................................................ 325X250X270mm 

N.W ...........................................................................................................................   2.5Kg  

Содержание VIS122












Отзывы:

Нет отзывов