7
After Sales Support
Telephone:
1300 886 649
•
Charge the unit for approximately 16 hours for optimal performance. You
can either charge it directly or while it is sitting on the charging base. To
assemble the charging base, push the holding frame into place on the base.
•
Insert the power adaptor cord into the back of the charging base (it will
only fit one way), then plug the adaptor into a suitable electrical outlet
and switch on the power at the power point.
•
Place the shaver onto the charging base, making sure the contacts are
properly aligned. The charge indicator will light up red while charging.
•
After a full charge, take the shaver off the base and unplug the base.
•
You can also charge the shaver directly, without the charging base.
Simply plug the adaptor cord straight into the bottom of the shaver and
plug the adaptor into a suitable power point. The charge indicator will
light up red while charging.
Notes
•
Place the charging base on a flat, stable surface during charging where it
cannot tip over.
•
Make sure the shaver is off before charging it.
•
A full charge takes approximately 16 hours.
•
Approximate usage time after a full battery charge is 30 minutes.
•
We recommend you do not leave the shaver on the charging base
connected to power for more than 24 hours. It can be damaged if used
with an alternating current.
Charging your multifunction shaver
Getting Started
Before first use
•
Remove all packaging materials from the appliance and dispose of them
responsibly. Plastic wrapping can be a suffocation hazard for babies and
young children, so ensure all packaging materials are out of their reach.
•
Inspect the power adaptor and cord for damage. Do not use the appliance if
the adaptor or its cord have been damaged or are not working properly.
