LED-HC 101
5-
C. Remote DMX address setting by CA-T DMX TESTER
D. Remote DMX address setting by universal DMX controller
If you use the function B, C or D to set the DMX start address, the fixtures of
the chain all DIP switch MUST be set to OFF.
When you set the address by DMX controller and dip-switch at the same
time, the order of the DMX controller will be invalid.
A. DMX address setting by dip-switches
1. Set the start address by dip-switch as the diagram below
2. Hold the AUTO DMX ADDRESS button for about 5 seconds, the LED
lights blinking indicating the address is set successfully.
Dip
# 1
# 2
# 3
# 4
# 5
# 6
# 7
# 8
# 9
# 10
Value
1
2
4
8
16
32
64
128
256
Master/Slave
•
Examples:
Channel 01
：
dip / on : # 1
（
=1
）
Channel 05
：
dip / on : # 1, # 3
（
1+4=5
）
Channel 09
：
dip / on : # 1, # 4
（
1+8=9
）
Channel 13
：
dip / on : # 1, # 3, # 4
（
1+4+8=13
）
B. Auto DMX addressing
1. The DMX address of fixture can be set automatically. Set all dip-switches to OFF
and hold the
AUTO DMX ADDRESS
button of the first unit for about 5 seconds,
the fixture will be set the DMX start address to 1, and the other fixtures of the
chain will be set their own DMX start address automatically.
2. The LED fixtures use four channels, the next
fixture’s will be automatic calculate
their own DMX address, not need to calculate the DMX channels of each fixture
in the chain. (Fixture 1 = 1, Fixture 2 = 5, Fixture 3 = 9, Fixture 4 = 13, Fixture…)
3. No need to turn the fixture off when you change the DMX address, as new DMX
