3
J
F
M
K
D
L
A
E
Fig. 3
Fig. 4
5 mm
Fig. 5
Fig. 6
English
CE24E PLANER
1.
SAFETY INSTRUCTIONS FOR
USE OF THE PLANER
1.1 WARNING! Read carefully the GENERAL
SAFETY INSTRUCTIONS LEAFLET, which is
included in the machine documentation.
1.2 Before starting up the machine make sure
that the supply voltage is the same as that shown
on
the speci
fi
cation plate.
1.3 Always keep hands clear of the cutting area,
and always hold the machine using the grips.
1.4
Always use original VIRUTEX blades. Never
use
blunt or damaged blades or blades of the wrong size
or in poor condition.
Always use the original VIRUTEX blade holders
and blade supports mounted on the machine. If
necessary, replace them with original VIRUTEX
parts.
1.5 It is necessary to work with dust collection in
order to prolong the life of the blades and prevent
any breakages.
4. GENERAL DESCRIPTION
The CE24E planer is equipped with spare, twin-
use hard metal blades, a depth guide for planing
or rebating, a lateral fence for working to outside
references and a safety switch with reverse setting
to avoid accidental start-up.
The tool has a suction point via which it can be
connected to our extractor AS182K, AS282K,
or to any in dus trial extractor, by means of the
STAN DARD DUST COLLECTORATTACHMENT
(ref. 6446073).
5. REGULATING THE CUT
Turn knob A, (Fig. 1) until the required depth is
reached. (Maximum cutting depth 3 mm)
6. CHANGING BLADES
Changing and adjustment of blades
WARNING! Disconnect the machine from the mains
before carrying out this operation. Loosen screws
D (Fig. 2) using the spanner included in the kit,
and slide the blade sideways to free it from the
blade cartridge. Insert a new blade or turn the old
one araound to use the second cutting edge, and
tighten up screws D.
The blade-holders on the machine are perfectly
Содержание CE24E
Страница 1: ...Planer CE24E 2496149...
Страница 2: ...2 A G H D Fig 1 OPERATING INSTRUCTIONS F D Fig 2...
