VOJAS Installation Manual
Distance
(inches)
Height
(inches)
Width
(inches)
Diagonal
(inches)
40
28
49
55.7
45
30
54.5
62
55
38
68
77.5
60
42
73.5
84.7
65
45
79
91.5
70
48.5
85.5
98.5
Figure 11.
Lens Throw Distance Chart
4.4
Assembling the Ceiling Mount Kit
The ceiling mount kit may be shipped in a disassembled condition to facilitate packing. You may need
to assemble it before you can mount it. Use the picture as a guide to assemble the kit.
4.5
Measurement, Marking & Mounting
1.
Position the ceiling bracket so that the lens is at the desired distance from the screen as per
the throw distance chart.
2.
Use the bracket as a template and mark the anchor bolt drill points
with a marking pencil
3.
Use the center punch and hammer to mark the drill points
4.
Drill the required holes to accommodate the anchor bolts or screws
depending the ceiling material.
5.
Insert the anchor bolts and secure them
6.
Install the ceiling bracket and tighten the nuts to lock it in place
7.
Attach the down tube to the ceiling bracket
4.6
Mounting the Device
Follow the procedure below to attach the device to the projector
bracket.
1.
The projector bracket comes with an adjustable legs,
loosen the adjuster screws to be able to position the
bracket to the device
2.
Position the movable legs over the mounting points of the device that are
closer to the lens
3.
Secure the clamp to the device with the M6 X 15mm bolts on all the four
arms and fully tighten the M6 bolts with the provided hex key
flammable material can create a fire hazard.
The device generates heat during operation, placing it in close proximity to
Warning:
