36
37
A.
Install Omni Connect
If you have not yet done so, download and install Omni Connect from
www.virtuix.com/download.
After installation, Omni Connect should be visible as a tray icon and can also be accessed from
your Windows menu or desktop shortcut.
Run Omni Connect and optionally set up your Omni Online user profile.
B.
Connect and Power the Omni
Verify that the Omni power cable is plugged into a wall outlet and the Omni USB-to-PC cable is
connected to your PC.
Press the Omni’s power button on the Left Tower. It should illuminate solid green.
If the power button LED is blinking, no PC is found. Please verify that the USB-PC cable is
plugged into your PC.
D.
Prepare the Shoes and Harness
Place the Harness so that it rests on top of the Ring, if it is not already there.
Insert one Pod into each of the Shoes, locking them into the cradles as shown below. When
plugged in properly, the Pods will show a blinking green light.
C.
Connect the Pods to your PC
If not done so yet, plug the Pods with the provided USB cables into any available USB ports on
the PC connected to your Omni.
The Pods will automatically be assigned to this PC and Omni.
When the Pods are fully charged, the lights on the Pods will illuminate green. Otherwise, the
lights will be red. When green, unplug the Pods and verify the Pods’ LEDs:
If the Pod battery is running
low, the Pod will show
a blinking red light.
If the Pod is clipped fittingly into
the shoe cradle and functioning
properly, the Pod will show
a blinking green light.
If the Pod is active but not
clipped properly into the shoe
cradle, the Pod will show
a blinking orange light.
1.
2.
3.
1.
2.
3.
3.
1.
2.
1.
2.
Doc V: “Note that the Pods won’t work with your
Omni until they have been connected with your PC
and assigned to your Omni. See the ‘other usage
instructions’ section for a complete list of the Pod LED
indicator meanings.”
To avoid risk of injury, follow the instructions related to use of the Omni Shoes and Safety Harness.
Do not wear the Omni footwear outside of the Virtuix Omni. Take off the Omni footwear when exiting
the Omni. Never use the Omni without the included Safety Harness!
Secure the Omni Harness inside and resting on top of the Ring, before you step into the Omni.
Never
use the Omni without the included Safety Harness!
CAUTION
WARNING
RED
ORANGE
GREEN
12-1. INSTRUCTIONS
AND FIRST USE
LED