VirtuFit TR-200I Treadmill
16
EN
RUNNING BELT ADJUSTMENT
01. Running belt deviates to left
Start the machine, set speed at 2-3 km/h without a load on the belt, use Allen key to turn the screw 1/4
turn (see fig. 1). Then allow the machine to run without a load for 1-2 minutes. Repeat process until the
belt becomes central.
02. Running belt deviate to right
Start the machine, set speed at 2-3 km/h without a load on the belt, use Allen key to turn the screw 1/4
turn (see fig. 2). Then allow the machine to run without a load for 1-2 minutes. Repeat process until the
belt becomes central.
03. Running belt jam
If the running belt is in dead condition, use the Allen key to turn the screw 1/2 a turn both left and right
until the jam solved (see fig 3).
04. Treadmill shocks when running
Adjust the tightness of the tire in time, as it becomes looser through use.
In this case, remove the safety pin and switch and turn the left and right adjusting bolts 1/4 turn
clockwise.
Start walking again until the tire has the correct tightness.
MAINTENANCE
