EN
VirtuFit Low Entry Bike 1.2i Hometrainer
14
Display shows no values
If the display does not show any values, you can try to check the sensor cables and the cables in the back
of the display. If this still does not work, you can move the sensor slightly.
Hometrainer beeps
Check that all bolts and nuts are tightened securely. Spray silicone spray if necessary. Also check the wheels.
Ticking sound when pedaling
This is probably caused by one of the pedals. Disassemble the pedal(s) and then re-assemble them on the
device. Watch out, the left pedal must be screwed counterclockwise to secure, the right pedal must be
screwed clockwise. Tighten the pedal firmly. If this is not the solution, report this to the supplier.
Heart rate display is not functioning
There can be various reasons for this:
• The sensor cables that run from the heart rate sensor to the display are not properly installed or
have become detached during use.
• The sensors may become damp, dirty or greasy. So you have to clean them regularly.
The console is not working
If there is no signal when pedaling, check if the cable is properly attached.
TROUBLE SHOOTING
