EN
Virtufit Etappe 2.0i Spinbike
18
EXTEND SERVICE LIFE
• The upright is secured with Allen screws, make sure that the bolts are tight at all times. If the bolts are
not tight enough anymore, this can cause cracking.
• If a main switch is attached to the appliance (on/off), it should always be used after use be turned
off.
For more information, visit https://virtufit.nl/service/faq/
SEMI-ANNUAL MAINTENANCE
DAILY MAINTENANCE
• Clean and remove sweat after each use Do not use aggressive cleaning agents and ensure that
the device remains free of moisture.
• Check that the rail and the wheels under the seat are free from dust and dirt.
• Inspect all bolts and nuts in connection with moving parts of the device, tighten as required.
• Check the mobility of moving parts and components of the use equipment, silicone spray if
necessary.
Safe and effective use can only be achieved if the device will be assembled and maintained
well. It is your responsibility to ensure that the equipment is regularly maintained. Parts
that are already used and / or damaged must be replaced before continuing using. The
spinbike may only be used indoors and stored away, prolonged exposure to weathering
and changes in temperature / humidity can have a serious impact on the electrical
components and moving parts of the device.
CLEANING
WARNING
Before cleaning the machine, please make sure the power has been switched off.
Cleaning: General cleaning of the device will extend the life of the spinbike. Hold clean the spinbike by
dusting regularly.
In addition, wear clean shoes to reduce the risk of contamination of the spinbike. Remove the hood at least once
a year to vacuum underneath.
MAINTENANCE
