EN
VirtuFit Elite FDR 2.5i Semi-Pro Crosstrainer
6
STEP 1
ASSEMBLY INSTRUCTIONS
Step 1:
1. Connect the motor communication wire (61) with Upright post communication wire
(76).
2. Attach the upright post (2) to the main frame (1) with Allen cylinder head full thread
screw (30), Flat washer (50) and Spring washer (53)
Step 2:
1. Attach the pulse circular tube (7) to the upright post (2) with Allen cylinder head full
thread screw (30), Flat washer (50).
2. Assemble the handlebar cover (104) with Philips pan head full thread screw (118)
50
53
30
30
76
61
1
2
A
A
30
50
83
7
2
104
• Connect the motor communication wire (61) with Upright post comunication wire (76).
• Attach the upright post (2) to the main frame (1) with Allen cylinder head full thread screw (30), Flat
washer (50) and Spring washer (53).
ASSEMBLY INSTRUCTIONS
Missing parts: If you think you are missing certain parts in your package, carefully check the styrofoa and
the device. Some parts (bolts, screws, etc.) are already attached to/in the device.
Error message: Ensure that all cables are carefully attached. The aluminum legs are very sensitive and
must remain straight. Do you receive an error message after mounting your device? Then you have to
straighten these aluminum legs again, this may cause the error message to disappear.
Socket screws: The device contains socket screws, make sure that the allen key is firmly in the
bolt before you apply force to the key. In this way you prevent the head of the socket head screw from
being rotated.
NOTE!
The transport wheels must be mounted on the front of the appliance.
