Virtue Sensation Owner’s Manual
http://www.virtueaudio.com
Page 4 of 4
Setting up your amplifier
We carefully box the Sensation to protect it during long-distance shipping. Here are the steps required
to get going.
1. Adjust feet and attach the volume knob
2. Connect the signal cables and speakers
3. Plug in unit
4. Turn on!
Adjust the feet and attach the volume knob
Rotate the feet to make sure that the unit is level on the installation
surface. Simply press the Volume knob onto the potentiometer shaft,
aligning the “D” hole in the knob with the slot in the “D” shaft.
Connect signal cables and speakers
Sensation is a full featured integrated amplifier and hook up is like most other units with which you are
probably familiar.
RCA Inputs:
There are three RCA line level signal inputs for three sources, switchable on the front of
the unit or by the included remote. Connect your audio sources (CD/DVD player, DAC, MP3 player,
tuner, TV audio, turntable) to the L/R RCA inputs.
Speaker Propeller Post
TM
: Attach your speaker wire to Virtue’s cleverly designed Propeller Post
TM
binding posts. They support banana plugs, bare wire or spades. Check connections after a week to
ensure they remained tight. If snug, they should remain that way.
