SOLO GA1 | User’s manual
9
3. SOFTWARE SETUP
3.1 CONFIGURING PFD/MFD DISPLAYS IN
WINDOWS
SOLO GA1 panel includes a VF-G1000 system with a Primary
flight display (PFD), Audio Panel and Multi flight display (MFD).
Before configuring the screens:
1.
Check the selector mode switch at the back of PFD
and MFD displays that is properly set according to the
position of PFD/MFD in cockpit.
One scenery
display
Multiple scenery
displays
PFD - MFD
PFD - MFD1
2vdc IN
VGA
HDMI
USB
12vdc OUT
The 12VDC power supply must be disconnected for
the change to be applied. Otherwise, the device will
remain in the previous state.
2.
Turn on the flight simulation computer.
Open “Display Settings” and make sure that the “Display
resolution” of both displays is set to 1024x768, as displayed
below. We recommend to set up the MFD on the right-hand-
side of the PFD panel. On “Display Settings”, the PFD and
MFD displays must be positioned under the main display, as
depicted below.
If you have
multiple scenenery displays
,
you must
set the leftmost scenery display as Main display
.
