Virtualfly SOLO Airliner, Руководство пользователя

Страница: 18 / 38

______________ USER’S MANUAL SOLO Airliner_____________
6. SIMULATING THE B
OEING
737 (ONLY MFS / P3D)
First of all, tell that to run the panel Boeing 737 you must to install the server B-737 "aeroServer737" in
the MFS / P3D computer. To buy that server license, enter in the following link and follow the steps for
the installation.
http://www.aerosoft.com.au/aerosoft_australia/home.html
The following link shows several tutorials where you can learn to get the most out of this software:
http://www.aerosoft.com.au/aerosoft_australia/video.html
Even so, we are going to provide minimal information for you to generate a flight plan through the FMC-
CDU and fly it through the autopilot.
The screen showing the indicators, autopilot, EFIS selector and CDU is a touch-screen so you can press
any button or key with your finger, but all numerical values are adjusted with some real rotary handle in
the panel. On the next page you will see a relationship between the rotary handle and values that fit.
¡IMPORTANT! Before selecting the B737 panel you must already have the B-737 selected in the MFS /
P3D, should also have the flight loaded with the plane on the ground, not to do so some indicators will
not work correctly.