RUDDO | User guide
2. ASSEMBLY
Placement (Figure A)
• Place the RUDDO on the floor in front of the chair in the desired po-
sition. If it’s possible we recommend to place in contact with the wall.
• Use the adhesive backed Velcro strips (4) to fix the RUDDO on the
floor.
• Connect the USB data cable (2) between the rear connector of
RUDDO and the computer.
Subjection strap (Figure B)
We provide you a subjection strap (3) to minimize the chair move-
ments while the brakes are applied:
• Lift the RUDDO from the floor and thread the strap through the
RUDDO’s base holes.
• Pass the strap through the chair securing the subjection.
• Pass the end of the strap through the tensioning tool and pull tight
until the chair is at the desired distance.
Fixing to the floor (optional) (Figure C)
The RUDDO can be fixed on the floor thanks to the holes placed
on its base. You will need 4 screws (not included) to assure that the
device is firmly fixed to the floor.
Содержание RUDDO
