Virtual Reality VRCD500-SDU, Руководство пользователя

Страница: 20 / 24

AUX IN, RCA OUT, & SUBWOOFER
1. Auxiliary Input
The Auxiliary Input Jack is on the front of
the unit on the right side. Insert the supplied
AUX IN cable's into the AUX IN jack.
Press the Mode button to choose AUX.
Connect any portable audio device such as
a DVD player or VCD player to the AUX
IN cable. Use the volume control to adjust
the volume.
2. RCA Line Out
The RCA Output Jack is on the back of the
unit on the right side. (See figure 1) This
output is for connecting an amplifier, equal-
izer, or other audio component that requires
a pre-amp out connection. (Red = Right,
White = Left) Follow the manufacturers in-
structions for the audio component that you
are connecting
4. Subwoofer Output
The Subwoofer Output Jack is on the back
of the unit on the right side. (See figure 1)
This output is for connecting a subwoofer
amplifier. You must connect an amplifier
to the Subwoofer Output Jack to drive a
subwoofer. Follow the amplifier's installa-
tion instructions. Press and hold the Volume
knob on the faceplate or the SEL button on
the Remote, "DISP OFF" will be shown on
the LCD. To activate subwoofer control,
press the Volume knob or the “SEL” button
on the Remote until you see "SUB OFF",
then use the Volume knob or the +/- but-
ton on the Remote to choose "SUB ON" or
"SUB OFF".
Fig. 1
ANTENNA
SOCKET
SUB WOOFER OUT
Right = Red
Left = White
RCA OUT
Right = Red
Left = White
18