Error! Reference source not found.: Error! Reference source not found.
______________________________________________________________________________________________________
2
GW9000 pack contents
Check that you have all the components listed below.
Table 1: Components for installing your GW9000
1x GW9000
1x purple ADSL cable
Both ends of the cable looks like this:
1x purple dial modem cable for PSTN
Both ends of the cable looks like this:
1x yellow Ethernet cable.
Both ends of the cable look like this:
If your GW9000 Series router has a
serial port, you need a serial cable. We
do not provide a serial cable with the
GW9000 Series.
Contact your distributor to purchase a serial cable that complies
with the interface that you use.
Your GW9000 Series router has 4 RS-
232 serial ports and 2 RS485 ports.
Generally these cables are not supplied
as the devices connecting to the
GW9000 often have proprietary pin
assignments. If you need a cable, please
request prior to shipment.
1x regional power cable.
AC Power
DC Power
100V-240V AC,
20 Watts
IEC mains
connector
DC -48V ± 10%
DC power input
Dual power feed
2 x multi-I/O cables to connect to the
analogue inputs, digital inputs and
digital outputs (optional).
1 x antenna (for 3G models only).
2 x rack mounting brackets (may vary
from image shown)
______________________________________________________________________________________________________
© Virtual Access 2014
Installing a GW9000 Series Router
Issue 2.0
Page 4 of 14