4: Configuring a 6500 Series router
Virtual Access GW6500 Series Quick Start Guide
© Virtual Access Ltd.
Issue: 1.0
Page 11 of 16
Figure 9: The AAL5 configuration page
1.
Type in the VPI/VCI details and select the correct encapsulation mode.
2.
Note: if you are configuring PPPoE services over ADSL, use Bridged (RFC 1483)
encapsulation. You will also need to enable pppoe under
Expert View ->
interfaces -> ppp-1 -> pppoe -> pppoe configuration
3.
Click
Update
and
save to flash
. Note which configuration you have committed
the changes to.
4.5
Configuring the APN and PIN
To set the APN and PIN, from the start page click
Advanced
. In the Advanced menu,
click
Expert View -> interfaces -> modem-1 -> gsm
. The Modem Interface on GSM
page appears.
Note
: for GW6510 units, the interface says
modem-0
. For GW6525 units, the interface
says
modem-1
.