manualshive.com logo in svg

Virtins technology VT DSO-2A20, Руководство пользователя

Поделиться
Скачать
Virtins technology VT DSO-2A20 Скачать руководство пользователя страница 42

VT DSO-2A20 Manual Rev. 1.1 

 

Virtins Technology 

  

2.4 Software Development Interface Specifications 

 
Multi-Instrument provides the following secondary development features: 
 
1.

 

Multi-Instrument can work as an ActiveX automation server so that an external program 
can access the data and functions that Multi-Instrument exposes. You can integrate Multi-
Instrument into your own software seamlessly via the ActiveX automation server 
interfaces exposed by Mutil-Instrument. 
 
Please refer to: 

Multi-Instrument Automation Server Interfaces

 

 

Download link: 

            

http://www.virtins.com/Multi-Instrument-Automation-Server-Interfaces.pdf

  

 

The above document and the sample automation client programs in Visual C++, Visual 
Basic and Visual C# can be found in the AutomationAPIs directory of the software.  

 
2.

 

You can use the vtDAQ and vtDAO interface DLLs supplied in this software to allow 
your own back-end software to interface to sound cards, NI DAQmx cards, VT DSOs, 
VT RTA, etc.. You can also develop your own vtDAQ and vtDAO compatible DLLs to 
allow Multi-Instrument to interface to your own hardware. 
 
Please refer to: 

vtDAQ and vtDAO_Interfaces

 

 

Download link: 

            

http://www.virtins.com/vtDAQ-and-vtDAO-Interfaces.pdf

  

 
The above document and the sample DAQ and DAO back-end programs and sample 
vtDAQ compatible DLL in Visual C++, Visual C# and Labview can be found in the 
DAQDAOAPIs directory of the software.  

 
3.

 

Virtins Technology’s Signal Processing and Analysis (vtSPA) Application Programming 
Interfaces (APIs) provides a suite of generic APIs for data processing and analysis. It 
contains some unique features / algorithms originated and only available from Virtins 
Technology. 
 
Please refer to: 

Signal Processing and Analysis (vtSPA) Interfaces

 

 

Download link: 

http://www.virtins.com/Signal-Processing-and-Analysis-APIs.pdf

 

The above document and the sample programs in Visual C++ can be found in the 
DAQDAOAPIs directory of the software.  

 
Furthermore, Multi-Instrument is well prepared to be rebranded for OEM services. Its look 
and feel can be readily changed through configuration without even reprogramming.  Contact 
Virtins Technology if interested.    

www.virtins.com                                                             42                             Copyright © 2017 Virtins Technology 
 

Содержание VT DSO-2A20

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды