Iss 8 - Mar 2019
Page 4 of 9
Fig. B - Identification label breakdown
Mounting of the charge point
The charge point should be mounted vertically on either a post or a wall. The position of the charge
point should allow all main functions of the charge point to be accessible between 750mm and 1200mm
of the ground in accordance with BS8300:2009, unless otherwise instructed not to. The charge point has
four integrated mounting holes that are accessible by removing the cover strips (Fig. A - 4).
Internal components
1.
Contactor
2.
RCBO
3.
EPC
4.
Mains input Earth terminal
5.
Main charge point earth point.
6.
Label stating the equipment must be earthed
Mounting hole
6
Model
Number
Charging
Current
Serial
Number
Fig. C
–
Inside the box
