21
How can I reset the Super Hub
to their default settings?
You can restore your Super Hub
settings to their ‘default’ state (this
can be found on the label on the rear
of your Super Hub) either via the Super
Hub Settings area (
see page 14
), or
using the ‘Rest’ pin-hole which can be
found on the bottom left edge of your
Super Hub. Place a pin (or similar) into
the hole, pressing the concealed
button down until you see the lights on
the unit re-set themselves.
113775_VM_Super Hub_MainGuide_AW02.indd 21
29/10/2010 10:50
